View H11F13SD_6950835.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

pa ckage schematic photo fet optocouplers 3/19/03 p age 1 of 10 ?2003 fairchild semiconductor corporation h11f1 h11f2 h11f3 description the h11f series consists of a gallium-aluminum-arsenide ired emitting diode coupled to a symmetrical bilateral silicon photo- detector. the detector is electrically isolated from the input and performs like an ideal isolated fet designed for distortion- free control of low level ac and dc analog signals. the h11f series devices are mounted in dual in-line packages. features as a remote variable resistor 100 ? to 300 m ? 99.9% linearity 15 pf shunt capacitance 100 g ? i/o isolation resistance as an analog switch extremely low offset voltage 60 v pk-pk signal capability no charge injection or latch-up ? on , t off 15 ? ul recognized (file #e90700) vde recognized (file #e94766) ordering option ?00 (e.g. h11f1.300) applications as a variable resistor isolated variable attenuator ? utomatic gain control active ?ter ?e tuning/band switching as an analog switch isolated sample and hold circuit multiplexed, optically isolated a/d conversion 6 1 6 1 6 1 1 2 6 5 4 output term. output term. anode cathode 3
3/19/03 p age 2 of 10 ?2003 fairchild semiconductor corporation photo fet optocouplers h11f1 h11f2 h11f3 absolute maximum ratings (t a = 25? unless otherwise speci?d) p arameter symbol device value units tot al device storage temperature t stg all -55 to +150 ? operating temperature t opr all -55 to +100 ? lead solder temperature t sol all 260 for 10 sec ? emitter continuous forward current i f all 60 ma reverse voltage v r all 5 v f orward current - peak (10 ? pulse, 1% duty cycle) i f(pk) all 1 a led power dissipation 25? ambient p d all 100 mw derate linearly from 25? 1.33 mw/? detector detector power dissipation @ 25? p d all 300 mw derate linearly from 25? 4.0 mw/? breakdown voltage (either polarity) bv 4-6 h11f1, h11f2 ?0 v h11f3 ?5 v continuous detector current (either polarity) i 4-6 all ?00 ma electrical characteristics (t a = 25? unless otherwise speci?d.) individual component characteristics p arameter test conditions symbol device min typ* max unit emitter input forward voltage i f = 16 ma v f all 1.3 1.75 v reverse leakage current v r = 5 v i r all 10 ? capacitance v = 0 v, f = 1.0 mhz c j all 50 pf output detector breakdown voltage either polarity i 4-6 = 10?, i f = 0 bv 4-6 h11f1, h11f2 30 v h11f3 15 off-state dark current v 4-6 = 15 v, i f = 0 i 4-6 all 50 na v 4-6 = 15 v, i f = 0, t a = 100? all 50 ? off-state resistance v 4-6 = 15 v, i f = 0 r 4-6 all 300 m ? capacitance v 4-6 = 15 v, i f = 0, f = 1mhz c 4-6 all 15 pf
3/19/03 p age 3 of 10 ?2003 fairchild semiconductor corporation photo fet optocouplers h11f1 h11f2 h11f3 isolation characteristics p arameter test conditions symbol min typ* max units input-output isolation voltage f = 60hz, t = 1 min. v iso 5300 vac (rms) isolation resistance v i-o = 500 vdc r iso 10 11 ? isolation capacitance v i-o = 0, f = 1.0 mhz c iso 2pf transfer characteristics (t a = 25? unless otherwise speci?d.) dc characteristics test conditions symbol device min typ* max units on-state resistance i f = 16 ma, i 4-6 = 100 ? r 4-6 h11f1 200 ? h11f2 330 h11f3 470 on-state resistance i f = 16 ma, i 6-4 = 100 ? r 6-4 h11f1 200 ? h11f2 330 h11f3 470 resistance, non-linearity and assymetry i f = 16ma, i 4-6 = 25 ? rms, f = 1khz all 0.1 % ac characteristics test conditions symbol device min typ* max units tu r n-on time r l = 50 ? , i f = 16ma, v 4-6 = 5v t on all 25 ? tu r n-off time r l = 50 ? , i f = 16ma, v 4-6 = 5v t off all 25 ?
3/19/03 p age 4 of 10 ?2003 fairchild semiconductor corporation photo fet optocouplers h11f1 h11f2 h11f3 3 1 2 0.8 0.6 0.4 -25 -50 0 25 50 75 100 t a - ambient temperature - c figure 5. resistance vs. temperature r(on) - normalized resistance 2 1 8 6 4 40 20 10 100 80 60 2 8 6 4 40 20 10 100 80 60 100 1000 10k 100k r(on) resistance - ? figure 6. region of linear resistance v 4-6 - maximum rms signal voltage - mv i 4-6 - maximum rms signal current - a 1k maximum rms voltage maximum rms current 10000 1000 100 10 1 0204 060 t a - ambient temperature ( c) figure 4. off-state current vs. ambient temperature i 46 - normalized dark current 80 100 normalized to: v 46 = 15v i f = 0ma t a = 25 c 800 600 400 200 0 -200 -400 -600 -800 -0.2 -0.1 0.0 i f = 2ma i f = 2ma i f = 6ma i f = 6ma i f = 10ma i f = 10ma i f = 14ma i f = 14ma i f = 18ma i f = 18ma 0.1 0.2 v 46 - output voltage (v) i 46 - output current ( a) figure 2. output characteristics 10 110 100 i f - input current - ma r(on) - normalized resistance figure 1. resistance vs. input current 1 0.1 normalized to: i f = 16 ma i 46 = 5 a rms figure 3. led forward voltage vs. forward current 2.0 1.8 1.6 1.4 1.2 1.0 0.1 10 1 100 i f - led forward current - ma v f - forward voltage (v) 0.8 t a = -55 c t a = 25 c t a = 100 c normalized to i f = 16ma i 4-6 = 25 a rms t a = 25?c observed range median device
3/19/03 p age 5 of 10 ?2003 fairchild semiconductor corporation photo fet optocouplers h11f1 h11f2 h11f3 5 3 2 1 150 100 150 200 250 300 350 v 4-6 - d.c. bias voltage - ma ? r(on) - change in resistance ?% figure 7. resistive non-linearity vs. d.c. bias 4 0 i 4-6 = 10 a rms r(on) = 200 ?
3/19/03 p age 6 of 10 ?2003 fairchild semiconductor corporation photo fet optocouplers h11f1 h11f2 h11f3 t ypical applications as a variable resistor as an analog signal switch isolated variable attenuators distortion free attenuation of low level a.c. signals is accom- plished by varying the ired current, i f note the wide dynamic r ange and absence of coupling capacitors; d.c. level shifting or parasitic feedback to the controlling function. isolated sample and hold circuit accuracy and range are improved over conventional fet s witches because the h11f has no charge injection from the control signal. the h11f also provides switching of either polarity input signal up to 30v magnitude. au t omatic gain control this simple circuit provides over 70db of stable gain control for an agc signal range of from 0 to 30ma. this basic circuit can be used to provide programmable fade and attack for electronic m usic. multiplexed, optically-isolated a/d conversion the optical isolation, linearity and low offset voltage of the h11f allows the remote multiplexing of low level analog signals from such transducers as thermocouplers, hall effect devices, strain gauges, etc. to a single a/d converter. a ctive filter fine tuning/band switching the linearity of resistance and the low offset voltage of the h11f allows the remote tuning or band-switching of active ?ters without switching glitches or distortion. this schematic illustrates the concept, with current to the h11f1 ireds controlling the ?ters transfer characteristic. test equipment - kelvin contact polarity in many test equipment designs the auto polarity function uses reed relay contacts to switch the kelvin contact polarity. these reeds are normally one of the highest maintenance cost items due to sticking contacts and mechanical problems. the totally solid-state h11f eliminates these troubles while providing f aster switching. 500k v in v out v in v out 500k 50 ? i f h11f1 i f h11f1 low frequency high frequency d ynamic range 70db for 0 i f 30ma @10khz d ynamic range 50db for 0 i f 30ma @1mhz v in v out i f v in v out i f t h11f1 c + - v in v out i f h11f1 agc signal 500k + - v 1 call v1 v 2 v n h11f1 msb msb call v n d ata input h11f1 lsb lsb h74a1 h74a1 a/d converter process control logic system data ac qu isition i f1 adjusts f 1 , i f2 adjusts f 2 i f1 a2 a3 a1 h11f1 i f2 h11f1 i f ac h11f1 i f h11f1 i f i test b d h11f1 i f h11f1 device under test p arameter sensing board i f to a & b for polarity 1 c & d for polarity 2
3/19/03 p age 7 of 10 ?2003 fairchild semiconductor corporation photo fet optocouplers h11f1 h11f2 h11f3 note all dimensions are in inches (millimeters) pa ck ag e dimensions (through hole) pa ck ag e dimensions (surface mount) pa ck ag e dimensions (0.4 lead spacing) recommended pad layout for surface mount leadform 0.100 (2.54) typ 0.020 (0.51) min 0.350 (8.89) 0.330 (8.38) 0.270 (6.86) 0.240 (6.10) pin 1 id. 0.022 (0.56) 0.016 (0.41) 0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.135 (3.43) 0.300 (7.62) typ 0 to 15 0.154 (3.90) 0.100 (2.54) seating plane 0.016 (0.40) 0.008 (0.20) lead coplanarity : 0.004 (0.10) max 0.270 (6.86) 0.240 (6.10) 0.350 (8.89) 0.330 (8.38) 0.300 (7.62) typ 0.405 (10.30) max 0.315 (8.00) min 0.016 (0.40) min 2 5 pin 1 id. 0.016 (0.41) 0.008 (0.20) 0.100 (2.54) typ 0.022 (0.56) 0.016 (0.41) 0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.165 (4.18) 4 3 0.020 (0.51) min 1 6 seating plane 0.016 (0.40) 0.008 (0.20) 0.070 (1.78) 0.045 (1.14) 0.350 (8.89) 0.330 (8.38) 0.154 (3.90) 0.100 (2.54) 0.200 (5.08) 0.135 (3.43) 0.004 (0.10) min 0.270 (6.86) 0.240 (6.10) 0.400 (10.16) typ 0?to 15 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) typ 0.070 ( 1.78 ) 0.060 ( 1.52 ) 0.030 ( 0.76 ) 0.100 ( 2.54 ) 0.295 ( 7.49 ) 0.415 ( 10.54 )
3/19/03 p age 8 of 10 ?2003 fairchild semiconductor corporation photo fet optocouplers h11f1 h11f2 h11f3 ordering information marking information option order entry identi?r description s. s surface mount lead bend sd .sd surface mount; tape and reel w. w 0.4" lead spacing 300 .300 vde 0884 300w .300w vde 0884, 0.4" lead spacing 3s .3s vde 0884, surface mount 3sd .3sd vde 0884, surface mount, tape and reel h11f1 v xx yy k 1 2 6 4 3 5 de?itions 1f airchild logo 2d e vice number 3 vde mark (note: only appears on parts ordered with vde option ?see order entry table) 4t wo digit year code, e.g., ?3 5t wo digit work week ranging from ?1 to ?3 6 assembly package code
3/19/03 p age 9 of 10 ?2003 fairchild semiconductor corporation photo fet optocouplers h11f1 h11f2 h11f3 note all dimensions are in inches (millimeters) t ape and reel quantity is 1,000 units per reel re?w pro?e (black package, no suf?) carrier tape specifications 4.0 0.1 1.55 0.05 user direction of feed 4.0 0.1 1.75 0.10 7.5 0.1 16.0 0.3 12.0 0.1 0.30 0.05 13.2 0.2 4.85 0.20 0.1 max 10.30 0.20 9.55 0.20 1.6 0.1 ? peak reflow temperature: 225 c (package surface temperature) ? time of temperature higher than 183 c for 60?50 seconds ? one time soldering reflow is recommended 215 c, 10?0 s 225 c peak ti me (minute) 0 300 250 200 150 100 50 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 te mperature ( c) time above 183 c, 60?50 sec ramp up = 3 c/sec
life support policy fairchild? products are not authorized for use as critical components in life support devices or systems without the express written approval of the president of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. a critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. disclaimer fairchild semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. 3/19/03 p age 10 of 10 ?2003 fairchild semiconductor corporation photo fet optocouplers h11f1 h11f2 h11f3
careers | sitema go datasheets, samples, buy technical information applications design center support company investors my f a home >> find products >> h11f1 6-pin dip bilateral analog fet output optocoupler general description back to top features contents ? general description ? features ? applications ? ordering information ? product status/pricing/packaging ? order samples ? safety agency certificates ? qualification support the h11f series consists of a gallium-aluminum-arsenide ired emitting diode coupled to a symmetrical bilateral silicon photo-detector. the detector is electrically isolated from the input and performs like an ideal isolated fet designed for distortion-f ree control of low level ac and dc analog signals. the h11f series devices are mounted in dual in-line packages. a s a remote variable resistor: z 100 ? to 300 m ? z 99.9% linearity z 15 pf shunt capacitance z 100 g ? i/o isolation resistance a s an analog switch: z extremely low offset voltage z 60 v pk-pk signal ca pability z no charge injection or latchup datasheet download this datasheet e - mail this datasheet this page print version related links request samples how to order products product change notices (pcns) support sales support quality and reliability design cente r pa g e 1 of 4 product folder - fairchild p/n h 11f1 - 6-pin dip bilateral analo g fet out p ut o p tocou p le r 17-au g -2007 mhtml:file://c:\temp\h11f1300.mht
back to top product status/pricing/packaging back to top applications back to top z t on , t off 15s z ul recognized (file #e90700) z vde recognized (file #e94766) { ordering option '300' (e.g. h11f1.300) a s a variable resistor: z isolated variable attenuator z automatic gain control z active filter fine tuning/band switching a s an analog switch: z isolated sample and hold circuit z multiplexed, optically isolated a/d conversion ordering information the following options can be ordered with this part: option order entry identifier description s .s surface mount lead bend sd .sd surface mount; tape and reel w .w 0.4" lead spacing 300 .300 vde 0884 300w .300w vde 0884; 0.4" lead spacing 3s .3s vde 0884, surface mount 3sd .3sd vde 0884, surface mount, tape and reel pa g e 2 of 4 product folder - fairchild p/n h 11f1 - 6-pin dip bilateral analo g fet out p ut o p tocou p le r 17-au g -2007 mhtml:file://c:\temp\h11f1300.mht
back to top safety agency certificates back to top qualification support click on a product for detailed qualification data product product status pb-free status package type leads packing method h11f1 lifetime buy dip-b 6 bulk h11f1300 lifetime buy dip-b 6 bulk h11f1300w lifetime buy dip-b 6 bulk h11f13s lifetime buy smdip-b 6 bulk H11F13SD lifetime buy smdip-b 6 tape reel h11f1s lifetime buy smdip-b 6 bulk h11f1sd lifetime buy smdip-b 6 tape reel h11f1w lifetime buy dip-b 6 bulk indicates product with pb -free second-level interconne ct. for more information click here. certificate agency e90700, vol. 1 (936 k) ul (1577) underwriters laboratories inc. e90700, vol. 1 (936 k) c-ul underwriters laboratories inc. 0122085 (677 k) semko semko p01101067 (1638 k) nemko nemko fi 16812 (964 k) fimko fimko 310684 - 02 (623 k) demko demko testing & certification 1027742 (2305 k) csa canadian standa rds association 94766 (1673 k) vde vde pruf-und zertifizierungsinstitut pa g e 3 of 4 product folder - fairchild p/n h 11f1 - 6-pin dip bilateral analo g fet out p ut o p tocou p le r 17-au g -2007 mhtml:file://c:\temp\h11f1300.mht
back to top product h11f1 h11f1300 h11f1300w h11f13s H11F13SD h11f1s h11f1sd h11f1w ? 2007 fairchild semiconductor products | design center | support | company news | investors | my fairchild | contact us | site index | privacy policy | site terms & conditions | standard terms & conditions o pa g e 4 of 4 product folder - fairchild p/n h 11f1 - 6-pin dip bilateral analo g fet out p ut o p tocou p le r 17-au g -2007 mhtml:file://c:\temp\h11f1300.mht

▲Up To Search▲

Price & Availability of H11F13SD

	To Download H11F13SD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .